العربية
EN
الدفع نوع:L/C,T/T,D/P,Others
إنكوترم:FOB,CFR,CIF,EXW
أدني كمية الطلب:1 Meter
علامة تجارية: ماكينات هوادونغ
Origin: الصين
شهادة: ISO9001
مكان المنشأ: الصين
الشهادات: ISO9001
الدفع نوع: L/C,T/T,D/P,Others
إنكوترم: FOB,CFR,CIF,EXW
| Belt Types | Features | Applications |
| General Purpose | Suitable for conveying powdery, granular, and lump materials. | For general material handling applications. |
| Oil-Resistant | Oil-resistant properties. | For conveying materials containing oil. |
| Acid & Alkali Resistant | Can convey materials with a pH value of 4–10; resistant to certain concentrations of acidic materials, etc. | For handling acidic or alkaline materials. |
| Heat-Resistant | Divided into types: T1 for material temperatures up to 100°C; T2 up to 125°C; T3 up to 150°C; T4 up to 175°C. | For conveying materials at specified elevated temperatures. |
| High-Temperature Resistant (Red-Hot / Abrasion Resistant) | Can convey lump materials at 300°C–500°C and powdery materials up to 300°C. Suitable for metallurgy, coking, building materials, and foundry industries for materials such as sintered products, cement clinker, and various high-temperature materials. | For conveying high-temperature materials. |
| General Flame-Retardant | The belt surface has flame-retardant and anti-static properties. | For conveying environments requiring flame resistance. |
| Cold-Resistant | The belt surface has cold-resistant properties and can be used under severely cold conditions, suitable for open-air material handling in frigid regions. Divided into two grades: C1 for operating environment temperatures from -45°C to +50°C; C2 for -60°C to +50°C. | For conveying materials in extremely cold environments. |
| Abrasion-Resistant | The belt surface has impact resistance and resistance to edge wear from materials. | Suitable for conveying hard, sharp-edged, or highly abrasive materials. |
| Item | Between Fabric Layers | Between Cover Layer And Carcass | |
| Cover Thickness 0.8–1.5 mm | Cover Thickness >1.5 mm | ||
| Average Value, N/mm, ≥ | 4.5 | 3.2 | 3.5 |
| Minimum Peak Value, N/mm, ≥ | 3.9 | 2.4 | 2.9 |
| Note: The Max peak value of the specimen shall not exceed 20 N/mm. | |||
| Fabric Type | 2 | 3 | 4 | 5 | 6 |
| Cotton Fabric | — | 400 | 500 | 600 | 800 |
| NN or EP-100 | 200 | 250 | 350 | 400 | 500 |
| NN or EP-150 | 250 | 400 | 500 | 630 | 800 |
| NN or EP-200 | 400 | 500 | 630 | 800 | 1000 |
| NN or EP-300 | 500 | 630 | 800 | 1000 | 1250 |
| NN or EP-400 | 630 | 800 | 1000 | 1250 | 1400 |
الآن الاتصال